Tel:+86 21 66531602
Fax:+86 21 66531935
Email:service@potomer.com
ADC Blowing Agent ADC-5
ADC-5 is a low-dust, powdered preparation of an organic chemical blowing agent. It is used for the production of polymer foam.
ADC-5 can be easily dispersed in polymer melts, rubber compounds and PVC plastisols.
|
Chemical composition |
Azodicarbonamide |
|
CAS No. |
123-77-3 |
|
Physical form |
Yellow powder |
Specification
|
Property |
Typical Value |
Unit |
|
ADC content |
97 |
%, min |
|
Gas yield |
220 |
ml/g, min |
|
Decomposition temperature |
200 |
≧ |
|
Volatiles |
0.3 |
%, max |
|
Ash content |
0.5 |
%, max |
|
Average particle size |
3-5 |
µm |
Application
ADC-5 can be used in extrusion of thermoplastics and synthetic rubbers.
Storage
ADC-5 should be kept cool and the upper temperature is max. 50≧. ADC-5 should not be stored near radiators and other heat sources such as sunlight or lighted cigarettes. There must be no sparks or naked flames in the vicinity.
ADC-5 is best stored in its original container in a separate and cool room. It should not be stored In manufacturing areas.
Solubility
Soluble in Dimethyl Formamide(DMF), poorly soluble in Dimethyl Sulphoxide(DMSO), insoluble in all other solvents and plasticisers.
Packaging
25kg carton with PE liner
Plastic
ADC Blowing Agent ADC-5
